Material list:
1 sheet 3/4" MDF (4'x8')
2 - 1x2, 6-ft long
4 - 1x3, 8-ft long2-inch nails for your nailer
(I used an 18-gauge brad nailer)
1 1/4" nails for nailer
(for the trim)
wood glue
Note:
If you buy 1x2 and 1x3s that have the sharp corner sit's going to be easier to hide any seams. I think these boardswere a higher grade and cost a bit more than the ones I've used before with the rounded corners, but it's going to makea nicer finished product. I think it was definitely worth the extra cost
Cut list:
1-62" x 15", MDF - top2 - 56.5" x 12", MDF - interior shelf & base3 - 9.5" x 12", MDF - small cubby dividers3 - 14" x 12", MDF - large cubby dividers2 - 25" x 12", MDF - table sides4 - 1x2 x 28"
(If you want your legs an inch or two longer I think it would be fine)
4 - 1x3 x 28"
(again, make these longer if you want your legs longer)
4 - 1x3 x 54.5"4 - 1x3 x 9"
Note:
Each 8' long 1x3 will give you a 28-inch, 54.5-inch and 9-inch piece.
Take the Side Street Sofa Table Plans
—